Increased Traction Safety for all Floors

Traction Up – For Floors allows you to easily increase the traction on all types of floors, both indoors and outside – including all tiles, stone / steel / tile, concrete / acrylic / vinyl / linoleum / fiberglass / rubber / etc. Once installed you will feel the extra grip only when needed as the technology activates when you require the extra traction.

Needs:

1. Water source –mop / bucket, water hose
2. Pump Spray if you want to spray area
   • Brush- If you will be pouring gallon onto floor surface then pushing around area
3. Wet Floor Sign (Optional)

Instructions:

1. Put up wet floor sign (optional)
2. Ensure the floor area you wish to treat is clean and free of wax.
   • Shake gallon for 2 seconds to agitate solution before using.
3. Pour product solution over area you wish to treat and use brush to cover the entire floor area you are wanting to treat.
   1. Keep area looking wet for the entire time
      • Re-pour onto areas that are drying
   2. Test the treated area with your foot after 30 minutes to see if you can feel the grip taking effect.
      If happy – go to step 3
      If you want more grip – test at 45-60 minutes then step 3
   3. Apply water by hose or mop to STOP the adhesion process of the product.
   You are now finished installation and the floor area is safe to walk on while still wet. Mop or vacuum up any excess water and enjoy enhanced traction from several months to many years depending on friction applied to area and how high of foot traffic the floor area receives.
4. Remove wet floor sign. (optional)

* While use of this product will reduce the likelihood of slips occurring, slips, trips and falls can still occur in any number of circumstances. Traction results vary depending on footwear tread design and amount of vertical weight on surface contact. Accidents and falls may occur on treated areas, notwithstanding its treatment with Traction Up – For Floors.